- 喇叭-JBL EON 系列
- >
- JBL EON210P
System Power Rating : 300 Watts (2 X 150 Stereo)
Maximum SPL Output : 124 dB peak system
output (pink noise)
Net Weight of System : 33 lbs. (19 lbs. for unit
with powered mixer,
14 lbs. for unit with
storage pod)
System Type : Powered mixer with 2 two-way bass-reflex enclosures
Frequency Range (-10 dB) : 60 Hz - 20 kHz
Frequency Response (±3 dB) : 75 Hz - 19 kHz
AC input : 120 - 240 V 50/60 Hz, voltage selector switch sets operational range
Amplifier Design : Crown® Class D
Output Connector : 2 X 1/4” TS (unbalanced) amplifier outputs
Input Connectors : 8 inputs (4 Mono Mic/Line, 2 X Stereo)
Channels : 1-4 are XLR / 1/4” jack combo connectors, XLR is a mic level input, 1/4” is a line level input. 5-6, one pair of 1/4” balanced TRS jacks (stereo), and a pair of RCA jacks (stereo). 7-8 is a 3.5 mm stereo jack
Input Impedance : Ch 1-4 Combo: XLR 3 K Ohms Balanced
Ch 1-4 Combo: TRS 20 K Ohms Balanced
Ch 5-6: TRS 25 K Ohms Balanced
Ch 5-6: RCA 12 K Ohms Unbalanced
Ch 7-8: 3.5 mm 30 K Ohms Unbalanced
Phantom Power : 30 V
Output Connectors : Monitor outputs: one pair of 1/4” balanced TRS jacks (stereo), and a pair of RCA jacks (stereo)
Headphone output: one 3.5 mm stereo jack
Signal Indicators
Main Output LED Ladder : Limit: Red LED indicates limiter active condition
Signal: Green LED indicates signal present
Signal Indicators: Ch 1-4 : Peak LED: Green = signal present, Red = input overload
EQ : Individual channel Bass and Treble controls, center detent, +/-6 dB cut and boost
System Limiter : On Board DSP Limiting and Tuning
LF Driver : 1 x JBL 328 H 250 mm (10 in) woofer
HF Driver : 1 x JBL 2414H-1 37.5 mm (1.5” ) annular polymer diaphragm, neodymium
compression driver
Coverage Pattern : 100º x 60º nominal
Crossover Frequency : 2 kHz
Crossover Type : Passive network, 2nd order filters (-12 dB per octave) for high pass and low pass filters
Enclosure : Polypropylene
Suspension/ Mounting : 36 mm pole socket with stabilizing screw
Handles : One on top
Grille : Powder coated perforated steel
Shipping Package (HxWxD) : 21.5” x 26” x 13.75”
(546 mm x 660 mm x 349 mm)
Maximum SPL Output : 124 dB peak system
output (pink noise)
Net Weight of System : 33 lbs. (19 lbs. for unit
with powered mixer,
14 lbs. for unit with
storage pod)
System Type : Powered mixer with 2 two-way bass-reflex enclosures
Frequency Range (-10 dB) : 60 Hz - 20 kHz
Frequency Response (±3 dB) : 75 Hz - 19 kHz
AC input : 120 - 240 V 50/60 Hz, voltage selector switch sets operational range
Amplifier Design : Crown® Class D
Output Connector : 2 X 1/4” TS (unbalanced) amplifier outputs
Input Connectors : 8 inputs (4 Mono Mic/Line, 2 X Stereo)
Channels : 1-4 are XLR / 1/4” jack combo connectors, XLR is a mic level input, 1/4” is a line level input. 5-6, one pair of 1/4” balanced TRS jacks (stereo), and a pair of RCA jacks (stereo). 7-8 is a 3.5 mm stereo jack
Input Impedance : Ch 1-4 Combo: XLR 3 K Ohms Balanced
Ch 1-4 Combo: TRS 20 K Ohms Balanced
Ch 5-6: TRS 25 K Ohms Balanced
Ch 5-6: RCA 12 K Ohms Unbalanced
Ch 7-8: 3.5 mm 30 K Ohms Unbalanced
Phantom Power : 30 V
Output Connectors : Monitor outputs: one pair of 1/4” balanced TRS jacks (stereo), and a pair of RCA jacks (stereo)
Headphone output: one 3.5 mm stereo jack
Signal Indicators
Main Output LED Ladder : Limit: Red LED indicates limiter active condition
Signal: Green LED indicates signal present
Signal Indicators: Ch 1-4 : Peak LED: Green = signal present, Red = input overload
EQ : Individual channel Bass and Treble controls, center detent, +/-6 dB cut and boost
System Limiter : On Board DSP Limiting and Tuning
LF Driver : 1 x JBL 328 H 250 mm (10 in) woofer
HF Driver : 1 x JBL 2414H-1 37.5 mm (1.5” ) annular polymer diaphragm, neodymium
compression driver
Coverage Pattern : 100º x 60º nominal
Crossover Frequency : 2 kHz
Crossover Type : Passive network, 2nd order filters (-12 dB per octave) for high pass and low pass filters
Enclosure : Polypropylene
Suspension/ Mounting : 36 mm pole socket with stabilizing screw
Handles : One on top
Grille : Powder coated perforated steel
Shipping Package (HxWxD) : 21.5” x 26” x 13.75”
(546 mm x 660 mm x 349 mm)